Maxim-integrated 73S1210F Evaluation Board Lite User Manual download pdf

73S1210F

Evaluation Board Lite

Simplifying System Integration™

QUICK START GUIDE

QS_1210F_005 August 2009

Introduction

The 73S1210F Evaluation Board Lite is a serial smart card reader development kit for the efficient

evaluation and development of stand-alone solutions. The board provides one card interface. The board

can be used in conjunction with any Windows

XP host system that has an RS-232 port. The host

application can access the board through the Teridian Pseudo-CCID (PCCID) commands to communicate

with asynchronous smart cards, following T-0 and T-1 protocols, in compliance with ISO7816-3 and EMV

4.1 standards.

For details about use of this development board in embedded applications (i.e. platforms other than PC

Windows XP), refer to the 73S12xxF Pseudo-CCID Host Application Guide (UG_12xxF_052) or contact

Teridian support.

System Requirements

• A PC running Microsoft

Windows XP and equipped with a serial port.

• Eight megabytes of disk storage for the Teridian Exerciser application and documentation.

Package Contents

• A 73S1210F/17/8010F Evaluation Board-Lite populated with a 73S1210F and pre-loaded with the

Teridian Pseudo-CCID firmware.

• A CD containing the Exerciser application generic host driver and documents.

• RS-232 Serial cable, female/male, 2 meters.

• A 5V DC power supply.

Default Setup

The 73S1210F Evaluation Board-Lite ships with a default configuration suitable for use as a turnkey

Transparent Smart Card Reader using a Pseudo-CCID over serial connection to communicate with a host

PC application. The board’s hardware and firmware are pre-configured by Teridian to work in this state and

the information in this document assumes this default configuration. Refer to the 73S1210 Evaluation-Lite

Board User Guide (UG_1217F_044) for details on alternate hardware configurations and uses.

Software Installation on Windows XP

Follow these steps using a PC running Windows XP:

• Extract “PCCID V y.yy Release.zip” (where y.yy is the latest version of the firmware release).

o Create an install directory. For example: “C:\TSC\”.

o Unzip “PCCID V y.yy Release.zip” to the just created folder. All applications and documentation

needed to run the board with a Windows PC will be loaded to this folder.

• Connect the Serial cable between the host system and the board.

• Plug the supplied adapter into the 5V DC jack on the board.

 Press the ON/OFF button once. The power LED D4 should turn on.

• At this point the application is now installed and the development board is ready to use. The provided

host application or any other host application can now be launched from Windows XP to access the

smart card reader.

THIS EVALUATION SYSTEM IS ESD SENSITIVE! ESD PRECAUTIONS SHOULD BE

TAKEN WHEN HANDLING THE BOARD!

1 2

73S1210F 1

Summary of Contents

Page 1 - 73S1210F

Page 2

73S1210F Evaluation Board Lite Quick Start Guide QS_1210F_005 2 Rev. 1.1 Demonstration Host Application Included on the CD is a demonstration applic

Comments to this Manuals

No comments

Maxim-integrated 73S1210F Evaluation Board Lite User Manual

Browse online or download User Manual for Hardware Maxim-integrated 73S1210F Evaluation Board Lite. Maxim Integrated 73S1210F Evaluation Board Lite User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Maxim-integrated 73S1210F Evaluation Board Lite